Blade - Fling-Tip Blade - Classic (Older Mowers Only) [411-160-702]
Older mowers only. This blade does not fit current Trimax mowers.
It fits older models such as the Pegasus S1, ProCut S2 and Stealth S1. Check the Compatibility tab or your parts manual to confirm your model. It uses the M10 blade bolt (411-322-100). Current mowers use an M12 bolt, so this blade will not fit them.
Does not fit: current models, including the Pegasus S2 to S5, ProCut S3 to S5, Snake, Stealth S2 and S3, Topper, Vulcan and X-WAM.
Got a current mower? Order the LazerBlade Uplift (411-160-842).
Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Pegasus - S1
- ProCut - Mk2
- ProCut - S2
- Stealth - Original
- Stealth - S1
No spare parts instructions available for this product.
The Fling-Tip Blade Classic is the original Trimax rotary cutting blade, used on older mower models only. It does not fit current Trimax mowers. It uses the same fling-tip principle as the current LazerBlade Uplift, where the fling-tip blade takes most of the wear so the service life of the blade beam is extended.
If your mower is a current model, order the LazerBlade Uplift (411-160-842) instead. If you are unsure which blade your mower takes, check the cutting system section of your parts manual or contact us.
- For older Trimax mowers only. Does not fit current models
- Fling-tip replacement only
- Uses the M10 blade mounting bolt (411-322-100). Current models use an M12 bolt
- Genuine part. Maintains your Trimax warranty
Will this blade fit my mower?
Fits: older models, including the Pegasus S1, ProCut Mk2, ProCut S2, Stealth S1 and Veemow S1. See the Compatibility tab for more.
Does not fit: current models, including the Pegasus S2 to S5, ProCut S3 to S5, Snake, Stealth S2 and S3, Topper, Vulcan and X-WAM.
Blades per mower
The Pegasus S1 runs 3 decks of 6 blades each, totalling 18 blades per mower. For any model not listed, check the cutting system section of your parts manual.
| Mower | Width code | Blades per mower |
|---|---|---|
| Pegasus S1 | 493 (one size only) | 18 |
| ProCut S2 | 140 | 4 |
| ProCut S2 | 178 | 6 |
| ProCut S2 | 210 | 6 |
| ProCut S2 | 237 | 8 |
| ProCut S2 | 282 | 8 |
| ProCut S2 | 300 | 8 |
| ProCut Mk2 | All widths | See your parts manual |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Blade Bolt - D-Bolt With M10 Nyloc Nut - Classic Blade Mounting | 411-322-100 | 1 per blade | The M10 bolt used with this blade. Not the same as the M12 bolt used on current models. |