Scraper - Roller Scraper Kit - 178cm [404-320-122]
Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Pegasus - S1
- Pegasus - S2
- Pegasus - S3
- Pegasus - S4
- Pegasus - S5
Download Spare Parts Instructions for part number 404-320-122
| Spare Part Instructions | Model Tags |
|---|---|
| SPI 25 - Wire Roller Scrapers | Procut S3 |
| SPI 27 - Wire Roller Scrapers | Pegasus S3, Pegasus S4, X-WAM S4 |
The roller scraper is a steel cable that spans the full width of the 178cm transport roller and maintains light contact with the roller surface as it turns. It continuously clears grass clippings, mud, and debris that build up on the roller during cutting. A blocked roller causes uneven ground contact and inconsistent cutting height across the deck. Replace when the cable shows significant wear or no longer maintains contact with the roller surface.
- Steel cable roller scraper
- Fits 178cm decks. See quantity table below for per-mower quantities by model
- Genuine part. Maintains your Trimax warranty
Quantity per mower
Quantities are for the complete mower. If your model is not listed, check the relevant sub-assembly section of your parts manual for the correct quantity.
| Mower | Cutting Width (cm) | Per mower |
|---|---|---|
| Pegasus S5 | 49.3, 61.0, 72.2 | 6, 2, 2 |
| Pegasus S5 SR | 49.3, 61.0, 72.2 | 3, 1, 1 |
| Pegasus S4 | 49.3, 61.0 | 2, 2 |
| Pegasus S3 | 49.3 | 1 |
| Pegasus S2 | 49.3, 61.0 | 6, 6 |
| Pegasus S1 | — | 6 |
| X-WAM S5 | — | 2 |
| X-WAM S4 | — | 2 |
| X-WAM (original) | — | 2 |
| ProCut S5 Double Roller | 178 | 2 |
| ProCut S5 Single Roller | 178 | 1 |
| ProCut S4 Double Roller | 178 | 2 |
| ProCut S4 Single Roller | 178 | 1 |
Order For Different Size Decks
This scraper is designed for 178cm decks. If you need scrapers for other deck sizes, use the part numbers below:
| Deck Size (cm) | Part Number |
|---|---|
| 237 | 404-320-124 |
| 290 | 404-320-129 |